DE | EN
Overview

removal of annealed colours on rail bars

Step1234

Materials

  • angle grinder Flex Inox LE 14-07
  • MultiBrax® MB 650 MV MultiGrinder attachment
  • Roloc nylon brush GB 608 70 x 12 mm, grit 120
  • non-woven strip GB 220 25 x 600 mm, yellow

Using the MultiGrinder attachment and the mounted Roloc nylon brush, remove the tarnish on the handrail and fill rod.

Note:

Recommended speed: 2.100 rpm

The nylon brush should always be held up to the tube as shown in the picture. If the filler rod is processed, the brush should therefore be rotated at 90° angle.

Match the transitions with the non-woven strip GB 220.

Finish.

Materials

Here you can see a list of all materials used.
For further information on a product just tick it and press enter.

GeBrax GmbH
Obere Hommeswiese 41-45
57258 Freudenberg
Germany
Tel.: +49 2734-28474-0
Fax : +49 2734-28474-10
E-Mail: info@gebrax.de