DE | EN
Overview

weld seam grinding 60° - mounted handrail

Step12345

Materials

  • angle grinder Flex Inox LE 14-07
  • MultiBrax® MB 650 MV MultiGrinder attachment
  • Non-woven combi discs GB 636 125 mm, A-Medium
  • Non-woven strips GB 220 VEL, 40 x 600 mm, yellow (grit 80-240)

Use the MultiGrinder attachment and the non-woven combi disc to remove the weld on the upper part of the workpiece.

Hinweis:

Recommended speed: 3.000 rpm

Thanks to the low height of the MultiGrinder head, it is also possible to work between the handrail and the handrail belt.

Guide the machine vertically in the direction of the arrow.

The angle grinder should have an angle of 10-15 ° to the workpiece in order to increase the removal rate and service life of the grinding tool.

Repeat the previous procedure for the lower part of the workpiece.

Note:

Guide the machine vertically in the direction of the arrow.

The angle grinder should have an angle of 10-15 ° to the workpiece in order to increase the removal rate and service life of the grinding tool.

Recommended speed: ca 3.000 rpm

With the non-woven strip GB 220, adjust the grinding pattern.

Finish.

Materials

Here you can see a list of all materials used.
For further information on a product just tick it and press enter.

GeBrax GmbH
Obere Hommeswiese 41-45
57258 Freudenberg
Germany
Tel.: +49 2734-28474-0
Fax : +49 2734-28474-10
E-Mail: info@gebrax.de