DE | EN
Overview

weld seam grinding 60°

Step12345

Materials

  • angle grinder Flex Inox LE 14-07
  • non-woven combi GB 636 125 mm, A-Medium
  • Non-woven strips GB 220 VEL, 40 x 600 mm, yellow (grit 80-240)

Use the non-woven combi disc GB 636 to remove the weld and remove the tarnishing colors in one operation.

Note:

Guide the machine vertically in the direction of the arrow.

The angle grinder should have an angle of 10-15 ° to the workpiece in order to increase the removal rate and service life of the grinding tool.

Recommended speed: ca 3.000 rpm

Repeat the previous procedure for the lower part of the workpiece.

Note:

Guide the machine vertically in the direction of the arrow.

The angle grinder should have an angle of 10-15 ° to the workpiece in order to increase the removal rate and service life of the grinding tool.

Recommended speed: ca 3.000 rpm

Use the non-woven strip GB 220 VEL to adjust the grinding pattern.

Finish.

Materials

Here you can see a list of all materials used.
For further information on a product just tick it and press enter.

GeBrax GmbH
Obere Hommeswiese 41-45
57258 Freudenberg
Germany
Tel.: +49 2734-28474-0
Fax : +49 2734-28474-10
E-Mail: info@gebrax.de