DE | EN
Overview

weld seam grinding and polishing handrail lid

Materials

  • Angle grinder Flex Inox LE
  • Trizact™-Klettscheiben 125 mm, A 16 (Korn 1200)
  • Haftstützteller Kunststoff ZB 330 W, 125 x 15 x M14-Gewinde, weich
  • Vlies-Kombi-Scheibe GB 636 125 mm, A-Medium
  • Tuchpolierwalze PB 100 125 x 40 mm x M14-Gewinde
  • High-gloss polishing paste PB 400, pink
  • Vliesstreifen GB 220 VEL, 40 x 600 mm, gelb (Korn 80-240)

Using the Inox angle grinder, the soft Hook & loop back up pad and the Trizact discs A16 (grain 1200), remove the annealed colours on the cover surface and remove the weld.

Note:

Recommended speed: ca 2.100 rpm

Pick up the high gloss polishing paste with the cloth polishing roller.

Polish the lid surface with the cloth polishing roller and the high gloss polishing paste.

Note:

Recommended speed: ca 2.100 rpm

Use the non-woven combi disc to remove the weld in one operation and remove the tarnish.

Note:

The angle grinder should have an angle of 10-15 ° to the workpiece in order to increase the removal rate and service life of the grinding tool.

Der Winkelschleifer sollte einen Anstellwinkel von 10-15° zum Werkstück haben, um die Abtragsleistung und Standzeit des Schleifwerkzeuges zu erhöhen.

Recommended speed: ca 3.000 rpm

Adjust the transitions with the velor nonwoven tape.                  

Grinding pattern or polished lid.

Materials

Here you can see a list of all materials used.
For further information on a product just tick it and press enter.

GeBrax GmbH
Obere Hommeswiese 41-45
57258 Freudenberg
Germany
Tel.: +49 2734-28474-0
Fax : +49 2734-28474-10
E-Mail: info@gebrax.de