DE | EN
Overview

weld seam grinding and polishing handrail lid

Materials

  • Angle grinder Flex Inox LE
  • Velcro discs 3M™ Trizact™ 237 AA
  • Hook & loop back up pad plastic ZB 330
  • Non-woven combi discs GB 636
  • Cloth polishing rollers PB 100
  • High-gloss polishing paste PB 400, pink
  • Non-woven strips GB 220 VEL

Remove the annealed colours and the weld seam with the Inox Angle grinder, the adhesive back-up pad soft and the Trizact Velcro disc A 16 (grit 1200).

Note:

Recommended speed: ca. 2,100 rpm

Bring the high-gloss polishing paste onto the cloth polishing roller.

Polish the lid surface with cloth polishing roller and the high-gloss polishing paste.

Note:

Recommended speed: ca. 2,100 rpm

Remove the weld seam as well as the annealed colours with the non-woven combi disc in only one work step.

Note:

Guide the device vertically in the direction of the arrow.

The angle grinder should have a 10-15° pitch to the workpiece for increasing the stock removal and the operation life of the grinding tool.

Recommended speed: ca. 3,000 rpm

Match the transitions with the velour non-woven belt.

Grinding pattern with polished lid.

Materials

Here you can see a list of all materials used.
For further information on a product just tick it and press enter.

GeBrax GmbH
Obere Hommeswiese 41-45
57258 Freudenberg
Germany
Tel.: +49 2734-28474-0
Fax : +49 2734-28474-10
E-Mail: info@gebrax.de